We will pre-program your Visonic Wireless Control Panel to operate in a manner that best suits your premises. If your alarm system is going to be monitored, we will also program the necessary settings to enable your alarm system to communicate with our or your Monitoring Station.

Kit Programming includes: -

- The programming of up to 4 user codes and User Names (if Applicable);

- The programming of 2 Visonic Wireless Sensors and Sensor Names (if Applicable);

- The programming of 2 x Visonic Wireless Remote Controls.

- The programming of the on-board dialler for back to base monitoring or for personal monitoring to your mobile phone; 

- The Programming of your External and internal sirens (If Applicable).

In order to program all this information you will need to complete a questionnaire that we can email you.

When you receive this kit, each box containing each sensor will be labelled as to which room it belongs to. All you need to do is install the sensor in the nominated room. 

Then:-

- Plug Your alarm system into a power point;

- Plug in the backup battery;

- and Connect your alarm system to an (Analogue PSTN) Phone Line - If it is monitored.